www.protekdevices.com 1 pmmad series steering diode arra ys applications ? high frequency data lines ? rs-232 & rs-422 interface networks ? ethernet: 10 base t ? computer i/o ports iec compa tibility (en61000-4) ? 61000-4-2 (esd): air - 15kv, contact - 8kw ? 61000-4-4 (eft): 40a - 5/50ns ? 61000-4-5 (surge): 24a, 8/20s fea tures ? 500 milliwatt continuous power dissipation ? esd protection > 40 kilovolts ? designed for bus voltage protection ? working voltage > 50 volts ? low capacitance 5pf per diode mechanical characteristics ? molded jedec so-14 package ? weight 0.15 grams (approximate) ? flammability rating ul 94v-0 ? tape and reel per eia standard 481-1-a ? marking: logo, part number & pin number 1 indicated by dot on top of package circuit diagram so-14 5089.r2 9/01 + gnd or (-) i/o port
www.protekdevices.com 2 5089.r2 9/01 pmmad series maximun ratings @ 25c unless otherwise specified continuous power dissipation continuous forward current (single diode) repetitive peak forward current @ tp=5s, f=50khz operating temperature electrical characteristics per line @ 25c unless otherwise specified symbol value -55 c to 150 c c c -55 c to 150 c ma ma milliwatts units 700 400 500 t j i frm i f p pk t stg parameter storage temperature pa r t number repetitive peak pulse voltage @ 10a v rrm volts maximum reverse leakage current @40v i r a forward peak pulse current @8/20s i fm amps maximum capacitance (per diode) @ 4v, 1 mhz pf see note 1 0.1 40 1.2 5 device characteristics maximum forward voltage @100ma v f volts 50 0 5 10 15 20 25 30 t - time - s 0 20 40 60 80 100 120 i pp - peak pulse current - % of i pp test waveform parameters t f = 8s t d = 20s t f peak value i pp e -t t d = t i pp /2 figure 1 pulse wave form note 1: device types include: pmmad130, pmmad1103, pmmad1105, pmmad1106, PMMAD1107 and pmmad1109. electrical characteristics apply to all device types.
www.protekdevices.com 3 pmmad series 5089.r2 9/01 pin configurations 2 3 5 7 8 9 11 12 14 mmad1106 8 diode common anode array nc pin 1, 4, 6, 10 & 13 2 3 5 7 8 9 11 12 1 14 14 diode array nc pins 4, 6, 10 & 13 mmad1103 7 854321 8 9 10 11 12 13 14 7 isolated diode array (independent) mmad1109 2 3 5 7 8 9 11 12 14 8 diode common cathode array nc pins 1, 4, 6, 10 & 13 mmad1105
www.protekdevices.com 4 5089.r2 9/01 pmmad series copyright pr ot ek de vices 2001 specifications: protek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except jedec). design changes: protek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer ? s and that in furnishing engineering and technical assistance, protek assumes no responsibility with respect to the selection or specifications of such products. package outline & dimensions protek devices 2929 south fair lane, tempe, az 85282 tel: 602-431-1801 fax: 602-431-2288 e-mail: sales@protek-tvs.com web site: www.protekdevices.com notes: 1. - t - = seating plane and datum surface. 2. dimension ? a ? and ? b ? are datum. 3. dimension ? a ? and ? b ? do not include mold protusion. 4. maximum mold protusion is 0.15 ? (0.006 mm) per side. 5. dimensioning and tolerances per ansi y14.5m, 1982. package outline so-14 package mounting pad -a- -b- p d- g -t- k c j r x 45 o 0 o - 10 o f 0.010 ? (0.25 mm) m b m ? 7 pl 0.010 ? (0.25 mm) m b m ? 8 pl t a s 14 8 7 1 0.050 ? typ 0.030 ? 0.005 ? 0.245 ? min 0.160 ? 0.005 ? 0.045 ? 0.005 ? a b c d f g j k p r 10.00 4.00 1.75 0.49 1.25 1.27 bsc 0.25 0.25 6.20 0.50 0.386 0.150 0.054 0.014 0.016 0.05 bsc 0.008 0.004 0.229 0.010 0.393 0.157 0.068 0.019 0.049 0.05 bsc 0.009 0.009 0.244 0.019 8.55 3.80 1.35 0.35 0.40 1.27 bsc 0.19 0.10 5.80 0.25 dim min max min max millimeters inches package dimensions t ape & reel p a cka ging: surface mount product is taped and reeled in accordance with eia-481, reel quantites and sizes are as follows: 7 inch reel - 1,000 pieces per reel; 13 inch reel - 2,500 pieces per reel
|
